Lediga jobb som Civilingenjör, produktion, elektronik i Uppsala

Om tjänsten Är du nyexaminerad eller i början av din karriär och vill arbeta praktiskt med tekniskt avancerade produkter? Då kan denna tjänst vara rätt för dig. Kunden är ett innovativt teknikföretag där testingenjörerna är en nyckelkomponent i produktionskedjan. Här testas hela system med hög teknisk komplexitet manuellt, praktiskt och med nära samarbete över avdelningar. Rollen passar dig som vill förstå helheten, arbeta praktiskt med teknisk utrustning och på sikt utvecklas inom företaget.
Dina framtida arbetsuppgifter Som testingenjör är du en viktig del av produktionens sista steg. Du arbetar nära produkterna och ansvarar för att varje system är noggrant testat och redo för leverans.
Exempel på arbetsuppgifter:

Genomföra manuella tester av färdiga system och delkomponenter


Utföra elektriska mätningar och arbeta med testutrustning kopplat till RF-teknik och transformatorer


Dokumentera testresultat och rapportera avvikelser


Arbeta med praktiska moment som vatten- och oljesystem, slangar och installationer


Delta i förbättringsarbete och utveckling av testmetoder, inklusive 5S och Kaizen


Samarbeta med support, produktutveckling och andra avdelningar


Det finns även möjlighet att följa med och installera utrustning hos kund internationellt för den som tycker om att resa


Vi söker dig som
Krav:

Högskole- eller civilingenjörsutbildning inom elektroteknik, teknisk fysik eller liknande


Goda kunskaper i svenska och engelska (talar och skriver)


Intresse för praktiskt tekniskt arbete


Meriterande:

Tidigare erfarenhet av mekaniskt arbete, t.ex. genom sommarjobb eller hobby


Erfarenhet från testmiljöer, produktion eller laborationer


Som person är du nyfiken och driven som trivs i en miljö där du får ta ansvar och arbeta praktiskt. Du ser möjligheter i förändring och uppskattar ett högt tempo när det behövs. Samarbetsförmåga, kommunikation och ett helhetstänk är viktiga egenskaper då du arbetar tätt tillsammans med kollegor och andra avdelningar.
Övrig information 
Start: Enligt överenskommelse
Plats: Uppsala
Omfattning: Heltid
Anställningsform: Konsultuppdrag med chans till förlängning och överrekrytering
Sök gärna så snart som möjligt då vi jobbar med löpande urval.  
Om företaget
Kunden är ett svenskt teknikföretag som utvecklar och producerar avancerade system för linjära acceleratorer. Deras produkter används globalt inom forskning, industri och försvar. Verksamheten kännetecknas av innovation, samarbete och en stark vilja att utvecklas framåt. Här får du inte bara en spännande roll, du får också möjlighet att växa inom företaget.
Om Wrknest Engineering
Wrknest Engineering är specialiserade på att hjälpa dig som ingenjör eller tekniker att hitta nästa steg i karriären. Vi samarbetar med framtidens företag och erbjuder både rekryterings- och konsultuppdrag inom teknik och industri – alltid med människan i centrum.
Vi tror på att bygga långsiktiga relationer och strävar efter att vara en engagerad och lyhörd partner. Via oss får du möjlighet att vara en del av tekniska framsteg som formar morgondagens samhälle – i roller där din kunskap gör verklig skillnad.
Vår ambition är att du ska trivas, utvecklas och känna dig stolt över ditt arbete. Läs mer på www.wrknestengineering.se. Visa mindre

We are looking for an Electronics Engineer for our location in Uppsala (On-site).
Activities contributing to the design and development of advanced medical products, solutions, and systems at GE Healthcare. Includes efforts to improve existing products and components with a strong emphasis on RF and power electronics. Significantly influences approaches, projects, and programs within the engineering team and broader organization, enhancing work practices, quality, and team efficiency. Provides key input into project priorities. Guided by established professional standards and policies, with considerable autonomy requiring sound operational judgment.


GE HealthCare is a leading global medical technology and digital solutions innovator with over 100 years of healthcare industry experience and around 50,000 employees globally. We enable clinicians to make faster, more informed decisions through intelligent devices, data analytics, applications and services, supported by our Edison intelligence platform. We operate at the center of an ecosystem working toward precision health - digitizing healthcare, helping drive productivity and improving outcomes for patients, providers, health systems and researchers around the world.Job Description
Job Description
Roles and Responsibilities:
Responsible for the design and engineering of power electronics and high-power RF systems (~15 kW / 25-100 MHz); designing, developing, optimizing, and evaluating electronic components, power supplies, and integrated circuitry for Cyclotron and Tracer Center products. Establishes design approaches and parameters; analyzes systems to confirm performance, conducts thorough functional and quality tests, and interprets results.
Advances expertise in RF and power electronics. Acts as a best practice and quality resource. Keeps abreast of cutting-edge technical developments in the field. Contributes to strategy and policy refinement, ensuring successful delivery within the scope of responsibility.
Maintains deep knowledge of best practices and how RF and power electronics integrate with other disciplines; understands industry trends and competitive factors that set GE Healthcare apart in the market.
Applies judgment to resolve complex challenges in design, testing, and project management. Brings fresh perspectives to established solutions. Uses extensive technical experience and data analysis to inform recommendations, leveraging internal resources and select external insights.
Serves as a mentor for less experienced colleagues. May oversee small-to-medium projects with manageable risks and resource needs. Communicates complex information clearly and effectively; builds consensus and influences peers through sound technical reasoning and collaborative dialogue.


Required Qualifications:
Significant experience in Engineering/Technology & Electronic Hardware, with a focus on RF and power electronics. Master’s degree from an accredited university or college (or a high school diploma with relevant experience). We are seeking an experienced professional with a proven track record in RF and power electronics design, with the ability to drive projects and work independently or as a team player while delivering innovative, high-quality solutions.
Fluency in English and Swedish (written and spoken); additional languages are a plus. Proficiency in Cadence Allegro PCB Design and OrCAD Capture (or equivalent ECAD tools). Proven expertise in high-power applications (up to 50 kW and ~100 MHz), component selection, and EMC compliance.


Why Join Us?
At GE Healthcare, you’ll drive innovation in RF and power electronics, contributing to medical technologies with a global impact. Join a supportive team where your skills make a difference.


Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you’d expect from an organization with global strength and scale, and you’ll be surrounded by career opportunities in a culture that fosters care, collaboration and support.


We expect all employees to live and breathe our behaviors: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership – always with unyielding integrity.


GE HealthCare is an Equal Opportunity Employer where inclusion matters. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or, age, disability, protected veteran status or other characteristics protected by law. Visa mindre

Vill du vara en del av ett framtidstänkande företag som bland annat arbetar för att effektivisera och bibehålla den svenska industrin? Har du erfarenhet av elektronikproduktion och vill vara med och skapa innovativa och kundanpassade automatiserade lösningar? Då kan du vara rätt för rollen som konsult hos vår kund!

Om tjänsten
SJR i Uppsala söker nu en Produktionsplanerare som vill vara med på en spännande resa! Vi är på jakt efter dig som är intresserad av rollen som konsult om ca sex månader med ambitionen att efter avslutat konsultuppdrag anställas direkt hos vår kund.

Du kommer till ett innovativt och kundorienterat företag i Uppsala vilka utvecklar avancerade elektroniska lösningar som är skräddarsydda för att möta marknadens behov. Genom att arbeta med banbrytande teknologi effektiviserar och moderniserar vår kund den svenska industrin.

Huvudsakliga arbetsuppgifter
Som produktionsplanerare hos vår kund får du en central roll där du ansvarar för att säkerställa att produktionen löper effektivt och enligt plan.

Du kommer främst att;

-Ansvara för att upprätta och följa produktionsplaner, samt säkerställa att produktionsmålen uppnås.
-Arbeta nära produktionsavdelningen, inköp och logistik för att optimera flödet och säkerställa att alla resurser finns tillgängliga vid rätt tidpunkt.
-Koordinera med underleverantörer och interna team för att säkerställa leveranstider och produktkvalitet.
-Analysera och förbättra produktionsprocesser för att skapa effektiva och hållbara arbetsflöden.
-Säkerställa att all produktion sker enligt fastställda kvalitetsnormer och krav, särskilt med tanke på de tekniska krav som ställs på elektroniska produkter.
-Hantera och uppdatera produktionsdokumentation och rapportering.


Lämplig bakgrund
För att lyckas i rollen har du troligen en ingenjörsutbildning inom elektronik, elektroteknik, automation eller produktionsteknik. Du har tidigare arbetat med elektroniktillverkning, gärna med erfarenhet av produktionsplanering och logistik i en tekniskt krävande miljö.

Vi ser även gärna att du har;

-Erfarenhet av att hantera komplexa logistikflöden och säkerställa rätt komponenter finns tillgängliga vid rätt tidpunkt för att undvika produktionsstopp.
-Erfarenhet av att arbeta i projektform, gärna med tvärfunktionella team, där du samarbetar nära utvecklare och projektledning.
-Förmåga att analysera och optimera produktionsflöden, samt implementera processförbättringar för att höja effektiviteten och produktkvaliteten.
-Goda kunskaper i svenska och engelska, både muntligt och skriftligt.


Personliga egenskaper
För att trivas hos vår kund bör du gilla förändring och att arbeta i ett växande bolag. Vår kund tror mycket på kombinationen av kreativitet, ordning och reda och att ha kul på jobbet. Vi erbjuder dig goda anställningsvillkor och möjligheten att vara med på en spännande resa med att skapa framtidens nya teknologi.

Ansökan
För mer information om tjänsten är du välkommen att kontakta Isabell Bengtsson [email protected] alternativt Christine Stamfeldt [email protected]. Vi intervjuar löpande och tjänsten kan komma att tillsättas innan ansökningstiden har gått ut. Sista ansökningsdag är 2025-04-10

Varmt välkommen med din ansökan!

Konsult hos SJR
Att arbeta som konsult hos SJR innebär att du blir en del av en dedikerad organisation med kompetens att ge dig perfekta förutsättningar att utvecklas både inom din yrkesroll och på ett personligt plan. Du får tillgång till vårt stora nätverk av intressanta företag och uppdragsgivare och därmed en unik möjlighet att ta din karriär till nästa steg.

Vi på SJR bryr oss om vår personal och tillsammans med oss får du en långsiktig partner som ger dig trygghet och stöd. Vi är lyhörda för dina behov och du kommer att ha en nära relation med din konsultchef som stöttar dig i din utveckling. Visa mindre

Some of the things you’ll do
Founded in 2017 and based on research from Uppsala University’s Ångström Laboratory, Altris is a global leader in Sodium-Ion technology. We manufacture and sell Fennac cathode active material while licensing battery designs for energy storage and transport applications. Our batteries offer lower energy density than Lithium-Ion but excel in longevity, charge/discharge speed, safety, operating temperature range, and cost efficiency.
In 2024, Altris secured investment from Clarios, a global leader in advanced battery solutions, marking a significant step in our rapid growth and innovation. As we scale up our sodium-ion battery technology, we are seeking an Electrolyte Engineer to join our Cell Development team. This key role involves designing, testing, and optimizing electrolyte formulations to enhance battery performance, safety, and durability while collaborating with cross-functional teams to advance Altris’ cell technology.
Key responsibilities include (but are not limited to)
Develop and optimize advanced electrolyte formulations to enhance battery cell performance.
Take a hands-on approach to prepare test samples, perform electrochemical testing, and conduct physical and chemical analysis of electrolytes and their components to evaluate performance, properties, compatibility, and interactions within the battery cell.
Utilize scripting tools to process experimental data, extract meaningful insight, and compile actionable reports.
Serve as the primary point of contact for electrolyte-related matters, ensuring clear communication and alignment with internal and external stakeholders.
Maintain strict adherence to safety standards, ensuring the proper handling of chemicals and fostering a safety-first culture.
Engage with cross-functional teams, e.g. production & quality teams, to align electrolyte advancements with overall manufacturing goals. You will most likely work closely with QC team as well.

What Were looking for
A minimum of a master’s degree in Chemistry, Chemical Engineering, Materials Science, or a related field is required.
Proven experience in the development, testing, and characterization of electrolytes, preferably within the context of sodium-ion or lithium-ion battery technology.
Familiarity with manufacturing processes for battery cells, whether in research, pilot, or production environments.
Solid expertise in electrolytes, their composition and an understanding of how the physical and chemical properties of their components impact battery cell behavior.
Experience with electrochemical testing techniques, including evaluating electrolyte performance and diagnosing material compatibility.
Hands-on laboratory experience in electrolyte preparation, testing, and characterization, with a proven track record of developing and optimizing formulations.
Data analysis proficiency, particularly in processing and extracting meaningful insights from experimental data using tools like Python or similar scripting software.
Strong communication skills, able to convey technical information clearly to cross-functional teams, stakeholders, and other departments.
Familiarity with industry safety protocols, especially for chemical handling and laboratory work, ensuring adherence to best practices in all tasks.
Ability to work both independently and collaboratively, maintaining effective communication within a multidisciplinary environment.

What you will get
We can promise you that you will be challenged, develop your skills and have the opportunity to work with truly amazing and competent colleagues. If you like changes and want to set new processes and ways of working - this is the place for you!
Diversity and inclusion are very important to us and we are committed to creating an inclusive work environment. We want to be a workplace where everyone’s perspectives and opinions are valued, and we are dedicated to creating opportunities for all employees to thrive and reach their full potential. Visa mindre

About Thermo Fisher Scientific Inc.
Thermo Fisher Scientific Inc. is a world-class company with a global presence, dedicated to enabling our customers to make the world healthier, cleaner, and safer. As a leading life sciences company, we are driven by our values of Integrity, Intensity, Innovation, and Involvement. With over 100,000 colleagues, we work together as one team to accelerate research, solve complex scientific challenges, drive technological innovation, and support patients in need. At Thermo Fisher Scientific, we value diverse experiences, backgrounds, and perspectives, fostering an inclusive environment where everyone's contributions are respected and celebrated.
Discover Impactful Work
This position is based on our site in Uppsala, where Thermo Fisher develops, manufactures, and market complete blood test systems to support the clinical diagnosis and monitoring of allergy, asthma, and autoimmune diseases. With 1,900 employees worldwide working with these products, and 1,000 in Sweden, we are the global leader in in-vitro allergy testing and the European leader in autoimmunity diagnostics.
Electronics Engineer Opportunity
We are offering an opportunity for an Electronic Engineer to join our Large Instruments engineering team in Uppsala. The Large Instruments team currently consists of 9 employees and 2 contractors with the overall design responsibility of our Phadia™ 250, Phadia™ 1000 and Phadia™ 2500 Series in-vitro diagnostics instruments. Our highly dedicated team has a wide variety of knowledge spanning from electrical and mechanical engineering to verification, assay, software and more.
As an Electronics Engineer, you will play a vital role in ensuring the optimal performance of our advanced systems. Your experience in electronics used in a sophisticated system will significantly contribute to the success of our products in the market.
Responsibilities
This role consists of working closely with our supplier in East Asia (Japan) with upgrades and updates of our current instruments.
Be an active member of development projects with our supplier in East Asia (Japan)
Collaborate and contribute to our multi-functional product care forum by investigating, testing and verifying new components in our instruments to ensure their functionality and performance meet the highest standards
Perform complaint investigations related to certain components
Support relevant CAPA investigations
Develop in-house test equipment required for different investigations
Perform and support technical investigations, tests and verifications of various types related to our instruments.
Conduct module-level testing of our products
Continuously improve testing methodologies and processes to enhance our efficiency and effectiveness
Offer technical assistance to individuals and organizations both within and outside of the company.

Requirements
Bachelor´s or Master´s degree in Electronics Engineering or a similar relevant background.
Experience from working with sophisticated products consisting of software, mechanics and electrical interfaces, preferably with in-vitro diagnostics instruments and/or other types of medical devices.
Preferably product development experience of similar products types.
Team player with ability to work in a global environment with multiple interfaces and people with various proficiencies
Strong written and verbal communications.
Good English skills is crucial since communication interfaces for this role are global.

If you are an engaged Electrical Engineer looking to make a significant impact in a world-class company, we invite you to apply today. Join us at Thermo Fisher Scientific, where your expertise and dedication will be valued and rewarded.
General conditions
Work Schedule: Standard (Mon-Fri)
Location
This position is based in our office in Uppsala, Sweden.
Apply today! http://jobs.thermofisher.com Visa mindre

Om jobbet
BECOME A PART OF OUR EXPANSION
Come and join the AAC Clyde Space expansion and become a vital part of our team and continue building our quality assurance for satellite and subsystems manufacturing in Uppsala. We are looking for a Space Systems and Quality Assurance Engineer colleague to support an increased customer demand and growing order book. This is a full-time role for an experienced engineer who can work to ensure our quality in the next generation of products and satellite projects.
Responsibilities will include:
· Perform role of quality assurance for spacecraft missions, co-ordinating inputs from other engineering disciplines
· Support and drive the Non Conformance and Change processes
· Support continuous quality improvement for the various parts of the business
· Support assembly, integration and test, during integration of spacecraft, to ensure requirements are met and any non-conformances are assessed
· Support customer/supplier discussions related to Product and Quality Assurance
Skills required:
A successful candidate will have relevant experience in several of the following areas:
· Relevant degree or equivalent work experience
· Experience working as a quality assurance with high reliability electronics hardware (MIL/Space)
· Able to communicate effectively and professionally with customers and colleagues to elicit requirements and manage expectations.
· The ability to work to meet tight deadlines and progress several different projects in parallel.
· Excellent technical writing, communication, and interpersonal skills.
· Able to manage time, work within a team and work autonomously when required.
Skills Desirable:
· Knowledge or awareness of ESA ECSS quality standards (or equivalent international standards relevant to MIL/Space engineering) is considered a bonus.
· Knowledge or awareness of ISO9001 standards (or equivalent international standards relevant to Space engineering).
ABOUT AAC CLYDE SPACE
AAC Clyde Space, a leading New Space company, specialises in small satellite technologies and services that enable businesses, governments, and educational organisations to access high-quality, timely data from space. This data has a vast range of applications, from weather forecasting to precision farming to environmental monitoring, and is essential to improving our quality of life on Earth.
Our growing capabilities bring together three divisions: · Space Data as a Service – delivering data from space directly to customers
· Space missions – turnkey solutions that empower customers to streamline their space missions · Space products and components – a full range of off-the-shelf and tailor-made subsystems, components, and sensors
AAC Clyde Space aims to become a world leader in commercial small satellites and services from space, applying advances in its technology to tackle global challenges and improve our life on Earth. Some of our clients include Horizon Technologies, Orbcomm, NSLComm, OHB Sweden, Intuitive Machines, Orbital Micro Systems, the United States Airforce Academy, UK Space Agency, European Space Agency and NASA.
AAC Clyde Space Group consists of the parent company AAC Clyde Space AB (publ) and subsidiaries in Sweden, the UK, the Netherlands, South Africa and the USA. Our main operations are in these five countries, with partner networks in Japan and South Korea.
AAC Clyde Space’s share is traded on the Nasdaq First North Premier Growth Market. Visa mindre

Arbetsbeskrivning


För kunds räkning söker vi en konsult med specialistkunskap inom Raman mikroskopering. Uppdraget är tänkt att starta i slutet av maj och beräknas pågå till slutet av december 2024.


Sista ansökningsdag: 2024-04-25, urval och intervjuer kommer att ske löpande och tjänsten kan komma att bli tillsatt innan sista ansökningsdag så tveka inte att ansöka redan idag. På grund av GDPR tar vi inte emot ansökningar via post eller e-mail.
För frågor, kontakta Patricia Torregrosa, Senior Konsultchef, [email protected]





Ansvarsområden


Som instrumentingenjör kommer det ingå att utföra följande uppgifter:


Involverad i inköp och implementering av instrument
Involverad i instrumentkvalificering, metodvalidering samt metoder transfer.
Supportera andra instrumentanvändare




Kvalifikationer


Vi söker en konsult med följande erfarenheter:


Du har Naturvetenskaplig utbildning från universitetet (BSc/Msc/PhD).
Du har goda kunskaper i Raman mikroskopi och vi ser gärna att du är en van användare av instrumentet.
Det är starkt meriterande om du även har vana av instrumentkvalificeringar, metodvalideringar och metod transfer mellan olika företag.
Kunskap i svenska och engelska är ett krav

För att du ska trivas i arbetet lägger vi stor vikt på din personlighet. Som person bör du vara noggrann, strukturerad, snabblärd, god problemlösningsförmåga, flexibel, duktig på att dra slutsatser och ha en vilja att lära dig. Vi tror även att du har en mycket god kommunikationsförmåga, tycker om att arbeta i team och tar ansvar så att gruppen levererar enligt satta tidslinjer och kvalitetskrav. För oss är det viktigt att all kompetens på arbetsmarknaden tillvaratas. Vi välkomnar alla sökande och eftersträvar mångfald.



Om företaget

Randstad
På Randstad vet vi att alla människor har en plats på arbetsmarknaden. Med verksamhet över hela landet och inom alla kompetensområden hjälper vi människor att hitta ett jobb som känns bra, och där de får möjlighet att växa, utvecklas och uppnå sin fulla potential. Med närmare 600 000 anställda i 38 länder är Randstad världsledande inom HR-tjänster, med målsättningen att bli världens främsta och mest uppskattade partner på arbetsmarknaden. Genom att kombinera vår passion för människor med kraften i dagens teknologi hjälper vi människor och företag att uppnå deras fulla potential. Vi kallar det Human Forward. Visa mindre

We are delighted to announce our collaboration with a leading healthcare company based in Uppsala. The company is widely recognised for its dedication to benefiting global health by integrating compassion, scientific acumen, and creative innovation. Their objective is to revolutionize healthcare, paving a transformative path for humanity.

Location: Uppsala.

About this role
The Site Lead Electrical and Sustainability Engineer is responsible for the ownership and operational management of electrical distribution systems. You will be a key stakeholder in the development of the site infrastructure and supporting Energy Management and the aim to drive towards Carbon Neutrality for Site.

Key Responsibilities
Manage and own the site electrical distribution system ensuring all regulatory standards are met at adhered to.

- Support and lead the development of both site asset registers and Preventative PM programs for the assets under the care of the role.
- Implementing the highest engineering standards to ensure safety, BCP and compliance on electrical infrastructure.
- Manage studies into the potential effects of Harmonics and other electrical interference to the site distribution system from renewable energy supplies.
- Ability to support the design of electrical systems as part of support to an integrated project team.
- Support the site management of the site-wide electrical distribution system and load sharing.
- Ensure compliance to all of the relevant national and European standards for Electrical Distribution systems and associated infrastructure.
- Prepare and modify Electrical Drawings, specifications, calculations, charts and graphs.
- Provide hands-on experience to troubleshoot any electrical issues as required.
- Provide support if needed to the supervision and co-ordination of equipment installations.
- Support the maintenance of critical electrical supply systems including generator backup and UPS systems.
- Lead site team in planning, scheduling and executing electrical shutdowns.
- Deliver Sustainability Health for Humanity Goals.
- Prioritize projects/tasks in line with Customer service requirements & strategy Engineering objectives.
- Act as voice of the customer.

Qualifications
Essential:
- 5+ year’s experience in Electrical Engineering
- Strong Operation and maintenance experience in a regulated industry.
- Experience in operation in ATEX environment.
- Maintenance and Operations experience within Med tech/Pharma /Oil &Gas; industry with equivalent GMP environment.
- Medium Voltage operator experience.

Desirable:
- Track Record in people leadership and development
- Asset management experience in the Pharma or Health Care Industries.
- Management experience in Utilities and Facilities Functions.
- Operational experience of BMS
- Other skills and competencies:
- A thorough knowledge of electrical design and engineering techniques
- Flexible work ethic
- Strong influencing skills - Excellent communication skills (written and oral).
- Problem-solving skills – To assist in maintaining project progress and on design issues.
- Decision Making – Required to make decisions on technical and management issues.
- Excellent Planning & Organizing Skills
- Continuous Improvement Focus
- Treat people with dignity and respect
- Fluent in Swedish and good level of English

The company's primary focus within its medical devices division is to broaden its reach, touching more patients' lives and aiding in a greater number of recoveries. With over a century's worth of pioneering advancements in patient care, they provide an unparalleled variety of products, services, programs, and a solid foundation in research and development. Their areas of expertise include surgical technology, orthopaedics, cardiovascular, and specialized solutions, all geared towards delivering significant clinical and economic value to healthcare systems worldwide. 

For more than 130 years, diversity, equity & inclusion (DEI) have been part of their cultural fabric and woven into how they do business every day. Their commitment to respect the dignity and diversity of all are embedded in their Credo. They believe that the success of their business depends on having the best talent in a workforce that reflects the diverse markets they serve around the world and an inclusive culture that values different perspectives and life experiences. That is why they in the Nordics are working to create an inclusive environment where diverse backgrounds, perspectives and experiences are valued and each and every employee feels that they belong and can reach their potential. No matter who they are.

Diversity, Equity & Inclusion with them means “You Belong”!


Application process Addilon is our partner in this recruitment. Please apply (CV and personal letter in English) via the link. We will fill the position immediately after finding the right candidate. Questions about the position are best answered on weekdays from 09.00-10.00, +46 10 207 43 20. We look forward to receiving your application. 

About Addilon Recruitment and hiring of the right managers and specialists in mainly Engineering, Sales, Purchasing and Logistics in Stockholm, Gothenburg, Mälardalen, Helsinki, Copenhagen, Oslo and Chicago.

Follow us: LinkedIn | Facebook | Instagram

We kindly but directly decline contact for direct sales of additional job advertisements, candidates etc. Visa mindre

About this role:
The Director of Operations is accountable for the operational performance of the business; delivering the financial plan; shaping and executing company strategy as well as developing the team and the site to meet future growth plans. Furthermore, the role will provide people leadership and act as Company Representative to internal and external stakeholders.
The site operations include both delivery of customer projects based on our cutting-edge product portfolio and the development of new technologies as well as manufacturing of satellites and products and its supporting processes.
The Director will continue to grow the highly skilled team currently consisting of 30 persons with various engineering competencies to further deliver a revenue growth that last year exceeded 40%.
Responsibilities will include:
· Provide leadership of the site including load and capacity and organisational structure
· Accountable for all operational performance metrics (safety, quality, cost, people and delivery)
· Deliver the financial plan
· Company representative to external stakeholders and customers
· Setting strategic direction for the site
Skills Required:
· Financial and commercial acumen
· KPI Setting, delivery and management
· Ability to motivate the team and achieves goals through the work of others
· Professionalism and strong work ethic
· People Leadership skills
· Experience in product and production systems for space or other industrial applications
· Ability to interact with key internal and external stakeholders in country and globally
Why AAC Clyde Space
· A unique opportunity to become a part of shaping and growing one of the world leading companies in the fast-growing space industry
· Join, lead and develop a very highly skilled team of colleagues
· We are working on a daily basis to ensure that space technology works to the benefit of the Earth and space environment
This position is available to fill immediately, so applicants are encouraged to reply promptly with CV and covering letter.
As part of our recruitment process, we collect and process personal data relating to job applicants. We are committed to being transparent about how we collect and use this data, please click here to see our job applicant privacy notice.
For further information please contact Peter Ternebring, Recruiter, +46 70 639 88 89.
About AAC Clyde Space
AAC Clyde Space, a leading New Space company, specialises in small satellite technologies and services that enable businesses, governments, and educational organisations to access high-quality, timely data from space. This data has a vast range of applications, from weather forecasting to precision farming to environmental monitoring, and is essential to improving our quality of life on Earth.
Our growing capabilities bring together three divisions:
· Space Data as a Service – delivering data from space directly to customers
· Space missions – turnkey solutions that empower customers to streamline their space missions
· Space products and components – a full range of off-the-shelf and tailor-made subsystems, components, and sensors
AAC Clyde Space aims to become a world leader in commercial small satellites and services from space, applying advances in its technology to tackle global challenges and improve our life on Earth.
Some of our clients include Horizon Technologies, Orbcomm, NSLComm, OHB Sweden, Intuitive Machines, Orbital Micro Systems, the United States Airforce Academy, Swedish National Space Agency, UK Space Agency, European Space Agency and NASA.
AAC Clyde Space’s main operations are located in Sweden, the United Kingdom, the Netherlands, the USA and South Africa, with partner networks in Japan and South Korea. Visa mindre

Department of Energy and Technology
At the Department of Energy and Technology, research and education are conducted focusing on how agriculture can contribute to a sustainable society. We have extensive expertise in technology and systems for sustainable production of food and bioenergy, including optimal nutrition circuits and logistics systems. Within the field of methodology we have extensive competence in System Analysis including Environmental Systems Analysis and LCA, as well as Biometrics (statistics and mathematics with applications in biological systems) and Automation.

Read more about our benefits and what it is like to work at SLU at https://www.slu.se/en/about-slu/work-at-slu/

Process development & intensification of urine dehydration technology
Description:
The sanitation sector is increasingly focusing on resource recovery as a way to adapt to environmental challenges. At the same time, the World needs flexible and safe sanitation systems that can be scaled-up quickly to service the billions of people currently lacking access to a proper toilet. A new sanitation paradigm is emerging with flexible, decentralized solutions that recover resources in the form of nutrients, water and energy for use in society.

SLU has developed a new technology to treat source-separated human urine, where fresh human urine is chemically stabilised and then evaporated to produce water and a solid fertilizer. The technology has been piloted in several locations across Sweden (e.g., at the offices of VA Syd in Malmö). If implemented globally, human urine could substitute about one-quarter of current nitrogen and phosphorus fertilizers worldwide.

The aim of this PhD project will be to continue the technology development, with focus on performing research in support of scaling up the urine dehydrating sanitation system. During this project, lab-scale treatment systems available at SLU will be scaled up into full scale operations for the production of 25 kg of dry fertilisers per day. The project will involve both fundamental research (e.g., evaluating changes to composition and properties of urine during dehydration) and implementation research (e.g., developing reactors for stabilizing urine at the toilet). The PhD project will be part of a larger Horizon Europe Research and Innovation Action collaborative project, “P2Green” (Closing the gap between fork and farm for circular nutrient flows), where three pilot regions will scale-up and implement innovative sanitation technologies in real-life conditions. The Island of Gotland will be one of the pilot regions where SLU will scale up and validate urine dehydration.       

Qualifications:
Required:


• Master of Science in Engineering with a focus on civil-, environmental-, chemical-, biochemical-, process engineering or equivalent.
• Good knowledge of English in speech and writing.

Meriting:


• Project management skills
• Knowledge and experience working with wastewater systems
• Knowledge and experience working with chemical processes
• To be able to communicate in Swedish

Great emphasis is placed on personal qualities, such as the ability to work together, analytical and problem-solving ability as well as the ability to work independently.

Place of work:      
Uppsala, Sweden.

Forms for funding or employment:
Employment 4 years.

Starting date:
Latest March 2023.

The application should contain:


• A Letter of Motivation, describing the applicant's previous academic and professional experience and motivation for applying for this position (maximum 1 A4 pages);
• A literature review on the current state-of-the of the treatment technology – alkaline urine dehydration (maximum 2 A4 pages).
• Curriculum Vitae
• Copy of degree incl. transcript of academic records
• Copy of degree thesis
• A list of two reference persons familiar with the applicant's qualifications

Application:
Click the “Apply” button to submit your application. The deadline is 2022-11-20.

To qualify for third-cycle (Doctoral) courses and study programmes, you must have a second-cycle (Master’s) qualification. Alternatively, you must have conducted a minimum of four years of full-time study, of which a minimum of one year at second-cycle level.

Applicants will be selected based on their written application and CV, degree project, copies of their degree certificate and transcript of records from previous first and second-cycle studies at a university or higher education institution, two personal references, and knowledge of English. More information about the English language requirements can be found here: www.slu.se/en/education/programmes-courses/doctoral-studies/new-doctoral-students/english-language-requirements/

Please note that applicants invited to interview must submit attested copies of their degree certificate, a transcript of records from previous first and second-cycle studies at a university or higher education institution. Applicants who are not Swedish citizens need to submit an attested copy of their passport’s information page containing their photograph and personal details.

Read about the PhD education at SLU at www.slu.se/en/education/programmes-courses/doctoral-studies/

Academic union representatives:
https://internt.slu.se/en/my-employment/employee-associations/kontaktpersoner-vid-rekrytering/



The Swedish University of Agricultural Sciences (SLU) is a world-class international university with research, education and environmental assessment within the sciences for sustainable life. Its principal sites are in Alnarp, Umeå and Uppsala, but activities are also conducted at research stations, experimental parks and educational establishments throughout Sweden. We bring together people who have different perspectives, but they all have one and the same goal: to create the best conditions for a sustainable, thriving and better world.

SLU has just over 3,000 employees, 5,000 students and a turnover of SEK 3 billion. The university has invested heavily in a modern, attractive environment on its campuses.

www.slu.se Visa mindre

Är du på jakt efter ett jobb där varje dag innehåller nya och spännande utmaningar? Då har du hittat helt rätt! Vi på Manpower söker just nu dig som uppskattar variation både vad gäller dagliga arbetsuppgifter och platsen du utför dem på. Vi har flera spännande uppdrag inom montering av mekanisk utrustning till cyklotronverksamheten för dig som är flexibel och lösningsorienterad. Låter det här som en spännande utmaning? Tveka inte att skicka in din ansökan!

Du kommer att arbeta som konsult, vilket innebär att du är anställd av oss på Manpower men arbetar som uthyrd konsult hos vår kund. Detta ger dig en mängd fördelar som vi gärna berättar mer om!

Vad går arbetet som konsult ut på?

Ditt uppdrag kommer att utföras hos en spännande kund i Uppsala där du kommer att arbeta med montering av mekanisk utrustning till cyklotronverksamheten. Mer specifikt innebär det att utföra mekaniskt och finmekaniskt arbete, montering, rördragning, test av delsystem, felsökning och pneumatik. Vidare kommer du ha eget ansvar för att produkterna håller leveranschema samt ge support till andra avdelningar och projekt med din kompetens.

Är du rätt person för jobbet?

Den här tjänsten passar dig som tycker att det är spännande att arbeta med montering av mekanisk utrustning till cyklotronverksamheten. Du har en fallenhet för att prata med olika typer av människor och en genuin vilja att göra ett bra jobb. Vidare ser vi gärna att du har erfarenhet av produktion och liknande arbete. Du har en teknisk utbildning praktisk erfarenhet av finmekaniskt arbete, förståelse för mekaniska ritningar och elektriska scheman samt grundläggande kunskap i affärssystem och officepaketet. Det är meriterande om du har erfarenhet av vakumsystem samt truckkort.

Erbjudande

Vi på Manpower hjälper dig att forma din framtid utifrån din kompetens samt dina behov och önskemål. Vi samarbetar med många attraktiva företag och kan öppna dörren till intressanta och spännande uppdrag. Som resurskonsult hos oss får du en anställning med allt vad det innebär i form av marknadsmässig lön, övertidsersättning, semester, tjänstepension och försäkringar enligt kollektivavtal. Friskvårdsbidrag och företagshälsovård ingår också.

Om Manpower

Manpower är Sveriges ledande rekryterings- och bemanningsföretag med tiotusentals attraktiva arbetsgivare över hela landet som våra kunder. Med vårt omfattande nätverk, lokalt såväl som globalt, kan vi erbjuda mängder av spännande lediga jobb som hjälper dig att bygga din karriär, både på kort och lång sikt. Hos oss kan du söka heltidsjobb eller extrajobb vid sidan av studierna. Visa mindre

MODIS Adecco Group (Life Science & Engineering) is now seeking for a Senior Hardware Engineer (Design Responsible HW) to Cavidi AB, Uppsala Sweden.

This is a direct recruitment assignment and you will be employed directly by Cavidi AB.

About Cavidi AB:

Cavidi is a Swedish biotech company founded as a spin-off from Uppsala University. Our expertise is based on understanding viruses and using this knowledge to create research tools and clinical diagnostics. Today our focus is on HIV but our methods and expertise can be applied to other viruses.

Cavidi´s head office is in Uppsala, Sweden and we have sales offices in South Africa, India and USA. Our customers include hospitals, patient clinics, private laboratories, the pharmaceutical industry and research institutions worldwide.

Cavidi is just about to launch its first fully automated system for HIV diagnostics, the ZIVA Analyzer, and is now looking for a Senior System Engineer to join our R&D department.

What to expect

As a Senior Hardware Engineer you will be working throughout the full product life cycle, from development to improvement of our current instrument the ZIVA Analyzer. This means that you will work with specifications, design, implementation, verification, documentation, support and improvement. The focus will be responsibility for the continued development of the ZIVA Analyzer instrument ensuring that demands from our customers as well as regulatory requirements are met.

You will have following main responsibilities:

• Design responsible for the ZIVA Analyzer Hardware which means that you will become an expert adviser and approver of changes related to the instrument
• Participate in projects and activities related to development and maintenance of the instrument
• Writing and updating technical documentation related to our instruments
• Be the technical contact with OEM suppliers and third party
• Work with risk management and complaints handling according to our quality systems
• Technical adviser in market related activities; support to the Product Manager, technical input to User manual and Service manual and related information

You will be part of the R&D team, with in total 15 persons, and report directly to the R&D Manager.

Is this the opportunity for you?

You have a broad knowledge and experience mechanical HW-development, including – drawing schematics, layout, certification, and going into production.

You have experience in working with PTC Creo and PDM-systems. Knowledge in electronical design and preferably experience in DipTrace or similar programs is favorable.

Ideally, you have worked in the life-science industry with diagnostic systems and have experience of risk management and development methodology including instrument verification. Understanding of the process of Design transfer from development to production is favorable.

As a person you should be someone who takes initiatives, works in a structured and independent manner, but also is a strong communicator and team-player, as much of your work will be carried out in cross-functional teams. In a role as Design Responsible it is also required that you are meticulous in the everyday work as it is a complex product and minor changes can have large effect on system performance. You have leadership skills and are interested in taking on an activity leader role as well as a team leader role.

Cavidi is an international company and therefore you need to be fluent in English, both written and spoken

Required competences

• Engineering degree in Mechatronics, Electronical or Mechanical engineering is required. The understanding of both mechanics and electronics is crucial for this opening
• At least 2 years of working with PTC Creo and PDM-systems
• Good communication skills in Swedish and English, both spoken and written

Please submit your application by attaching your CV and personal letter in English (interviews are held continuously).

If you have any questions about the assignment, do not hesitate and contact Markus Dahl ([email protected]).

Modis is a staffing & recruiting company and is part of the Adecco Group, the world´s leading HR-solutions provider across 60 countries. This scale and scope ensures Modis is truly a global community. Our mission is to be the Leading Professional Services Company by finding the right match between you as a candidate and you as a customer. We are a team with various and complementary backgrounds within Life Science, Engineering and Technology. We can ensure that we understand our customer needs and we can ensure that we understand the competence-profiles of our applicants and candidates. Visa mindre